HP Presario 1600 Presario 1650 Series Maintenance and Service Guide - Page 74
Removing the Speaker Assembly
View all HP Presario 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Maintenance & Service Guide Presario 1600 Series Models: 1650 and 1655 | Home Page | Notice | Preface | Product Description | Troubleshooting Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications Pin Assignments | Battery Pack Operations Removing the Speaker Assembly Electrostatic Discharge Service Considerations Cables and Connectors Preparing the Computer for Disassembly Battery Pack Palmrest Cover with Touch Pad Keyboard Heatspreader Modem Processor Status Panel Interface Board Hard Drives Battery Charger Board CD Drive Display Panel Assembly Upper CPU Cover Speaker Assembly Diskette Drive Fan Assembly Audio Board System Board Memory Module To remove the speaker assembly, complete the following steps: 1. Prepare the computer for disassembly. 2. Remove the palmrest cover with touch pad. 3. Remove the keyboard. 4. Remove the heatspreader. 5. Remove the hard drive. 6. Remove the stiffener bracket. 7. Remove the display panel assembly. 8. Remove the CD drive. 9. Disconnect the speaker cables from the system board and remove the speaker assembly from the chassis. The speaker cables must be properly routed when replacing the speaker assembly. Place the cables in such NOTE: a manner that they cannot be caught or snagged by screws. For more information refer to the section on speaker assembly cable position. To replace the speaker assembly, reverse the previous procedures.