HP Presario 1600 Presario 1660 Series Maintenance and Service Guide - Page 58
Removing the Battery Charger Board
View all HP Presario 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Maintenance & Service Guide Presario 1660 Model MSG Index | Home Page | Notice | Preface | Product Description | Troubleshooting Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications Pin Assignments | Battery Pack Operations Removing the Battery Charger Board Electrostatic Discharge Service Considerations Cables and Connectors Preparing the Computer for Disassembly Battery Pack Palmrest Assembly Keyboard and Heatspreader Processor Hard Drives Upper CPU Cover DVD Drive Battery Charger Board Modem Display Panel Assembly Speaker Assembly Diskette Drive Fan Assembly System Board Memory Module To remove the battery charger board, complete the following steps: 1. Prepare the computer for disassembly. 2. Remove the Palmrest Assembly. 3. Remove the keyboard and heatspreader. 4. Remove the hard drive. 5. Remove the screw from the middle of the battery charger board. 6. Unplug the battery charger board from the connector on the system board, and lift it out of the chassis. To replace the battery charger board, reverse the previous steps. When replacing the battery charger board, ensure the pins are NOTE: aligned with the sockets on the system board connector before pressing the board in place.