HP Pro 3330 Micro Maintenance & Service Guide Pro 3330/3380 Microtower Pro - Page 139

Fan Assembly

Get HP Pro 3330 Micro PDF manuals and user guides View all HP Pro 3330 Micro manuals
Add to My Manuals
Save this manual to your list of manuals

Page 139 highlights

Fan Assembly Description Fan Spare part number 656834-001 The fan assembly is attached to the inside floor of the chassis using two screws. The fan is inside of a removal metal cage. 1. Prepare the computer for disassembly (Preparation for Disassembly on page 101). 2. Remove the access panel (Access Panel on page 102). 3. Remove the front bezel (Front Bezel on page 104). 4. Disconnect the fan cable from the system board connector labeled SYS_FAN. 5. Remove the Torx screw that secures the left side of the fan to the computer. 6. Cut the plastic tie (1) that secures the fan cable to the power supply power cables. 7. Remove the two screws (2) that secure the fan to the computer. The screw near the computer side is not shown in the following image. 8. Lift the fan assembly up and out of the computer (3). Figure 8-31 Removing the fan Fan Assembly 129

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
Fan Assembly
Description
Spare part number
Fan
656834-001
The fan assembly is attached to the inside floor of the chassis using two screws. The fan is inside of a
removal metal cage.
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
101
).
2.
Remove the access panel (
Access Panel
on page
102
).
3.
Remove the front bezel (
Front Bezel
on page
104
).
4.
Disconnect the fan cable from the system board connector labeled SYS_FAN.
5.
Remove the Torx screw that secures the left side of the fan to the computer.
6.
Cut the plastic tie
(1)
that secures the fan cable to the power supply power cables.
7.
Remove the two screws
(2)
that secure the fan to the computer. The screw near the computer
side is not shown in the following image.
8.
Lift the fan assembly up and out of the computer
(3)
.
Figure 8-31
Removing the fan
Fan Assembly
129