HP Pro 3330 Micro Maintenance & Service Guide Pro 3330/3380 Microtower Pro - Page 68
Removing a DIMM, Populating DIMM Sockets,
View all HP Pro 3330 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
5. Remove the memory module from the socket. Figure 7-9 Removing a DIMM NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket. A DIMM must occupy the DIMM1 socket. Always populate the blue sockets before the black sockets in each channel. To create a dual-channel memory configuration, the memory capacity of Channel A must equal the memory capacity of Channel B. Refer to Populating DIMM Sockets on page 56 for more information. To install a memory module, reverse the removal procedures. 58 Chapter 7 Removal and Replacement Procedures - Microtower (MT) Chassis
5.
Remove the memory module from the socket.
Figure 7-9
Removing a DIMM
NOTE:
A memory module can be installed in only one way. Match the notch on the module
with the tab on the memory socket.
A DIMM must occupy the DIMM1 socket. Always populate the blue sockets before the black
sockets in each channel.
To create a dual-channel memory configuration, the memory capacity of Channel A must equal
the memory capacity of Channel B. Refer to
Populating DIMM Sockets
on page
56
for more
information.
To install a memory module, reverse the removal procedures.
58
Chapter 7
Removal and Replacement Procedures – Microtower (MT) Chassis