HP Pro 3330 Micro Maintenance & Service Guide Pro 3330/3380 Microtower Pro - Page 95
Power Switch/LED Assembly, Preparation for Disassembly, on Access Panel, Front Bezel
View all HP Pro 3330 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Power Switch/LED Assembly Description Power switch/LED assembly Spare part number 657105-001 1. Prepare the computer for disassembly (Preparation for Disassembly on page 48). 2. Remove the access panel (Access Panel on page 49). 3. Lay the computer on its side with the front facing toward you. 4. Remove the front bezel (Front Bezel on page 51). 5. Remove the optical drive (Removing an Optical Drive on page 73). 6. Disconnect the braided cables from the black system board connector labeled JFP1. 7. Remove the cable from the clips in the optical drive cage. Figure 7-39 Power switch cable routing Power Switch/LED Assembly 85
Power Switch/LED Assembly
Description
Spare part number
Power switch/LED assembly
657105-001
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
48
).
2.
Remove the access panel (
Access Panel
on page
49
).
3.
Lay the computer on its side with the front facing toward you.
4.
Remove the front bezel (
Front Bezel
on page
51
).
5.
Remove the optical drive (
Removing an Optical Drive
on page
73
).
6.
Disconnect the braided cables from the black system board connector labeled JFP1.
7.
Remove the cable from the clips in the optical drive cage.
Figure 7-39
Power switch cable routing
Power Switch/LED Assembly
85