HP Pro 3335 Micro Maintenance & Service Guide Pro 3330/3380 Microtower Pro - Page 214
Interpreting POST Diagnostic Front Panel LEDs and Audible Codes
View all HP Pro 3335 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
Table E-1 Numeric Codes and Text Messages (continued) Control panel message Description Network Server Mode Active and No Keyboard Attached Keyboard failure while Network Server Mode enabled. Parity Check 2 Parity RAM failure. Recommended action 1. Reconnect keyboard with computer turned off. 2. Check connector for bent or missing pins. 3. Ensure that none of the keys are depressed. 4. Replace keyboard. Run Computer Setup and Diagnostic utilities. Interpreting POST Diagnostic Front Panel LEDs and Audible Codes This section covers the front panel LED codes as well as the audible codes that may occur before or during POST that do not necessarily have an error code or text message associated with them. WARNING! When the computer is plugged into an AC power source, voltage is always applied to the system board. To reduce the risk of personal injury from electrical shock and/or hot surfaces, be sure to disconnect the power cord from the wall outlet and allow the internal system components to cool before touching. NOTE: If you see flashing LEDs on a PS/2 keyboard, look for flashing LEDs on the front panel of the computer and refer to the following table to determine the front panel LED codes. Recommended actions in the following table are listed in the order in which they should be performed. Not all diagnostic lights and audible codes are available on all models. Table E-2 Diagnostic Front Panel LEDs and Audible Codes Activity Beeps Possible Cause Recommended Action Green Power LED On. None Computer on. None Green Power LED flashes every two seconds. None Computer in Suspend to RAM mode (some models only) or normal Suspend mode. None required. Press any key or move the mouse to wake the computer. 204 Appendix E POST Error Messages