HP ProDesk 680 G6 PCI Micro Maintenance and Service Guide - Page 46
Remove the front bezel, Remove the optical drive
View all HP ProDesk 680 G6 PCI Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Table 4-4 Solid-state drive descriptions (continued) Description 512 GB, M.2 2280, PCIe, NVMe, value solid-state drive 512 GB, M.2 2280, PCIe-3×4, SED solid-state drive with TLC 512 GB, M.2 2280, PCIe, NVMe + 32 GB, 3D Xpoint solid-state drive 256 GB, M.2 2280, PCIe, NVMe, SS solid-state drive with TLC 256 GB, M.2 2280, PCIe, NVMe, value solid-state drive 256 GB, M.2 2280, PCIe-3×4, SED solid-state drive with TLC 256 GB, M.2 2280, PCIe + 16 GB, 3D Xpoint solid-state drive 128 GB, M.2 2280, PCIe, NVMe, solid-state drive with TLC 16 GB, M.2 2280, PCIe-3×2, NVMe, solid-state drive with TLC SATA-3 solid-state drive: 512 GB, 2.5 inch, SATA-3, SED solid-state drive with TLC, OPAL2 512 GB, 2.5 inch, SATA-3, solid-state drive with TLC 256 GB, 2.5 inch, SATA-3, SED solid-state drive with TLC, OPAL2 256 GB, 2.5 inch, SATA-3, solid-state drive with TLC Before removing the solid-state drive module, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 23). 2. Remove the access panel (Access panel on page 23). 3. Remove the optical drive (Optical drive on page 24). 4. Remove the front bezel (Front bezel on page 25). 5. Remove the optical drive cage (Optical drive cage on page 26). Remove the solid-state drive module: 1. Remove the screw that secures the drive (1). 38 Chapter 4 Removal and replacement procedures ENWW