HP ProLiant 8500 Compaq ProLiant 8500 Servers I/O Module Upgrade Guide - Page 18
Removing the I/O Module, the top levers downward
![]() |
View all HP ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
14 Compaq ProLiant 8500 Servers I/O Module Upgrade Guide Removing the I/O Module CAUTION: If the server is equipped with a three-segment virtual power button cable, refer to the "Removing the Virtual Power Button Cable" section at the end of this guide for further instructions before continuing with this section. Removing the I/O module without disconnecting the virtual power button cable can damage the cable. 1. Push in on the sides of the cam levers on the I/O module and rotate the top levers downward . 2. Pull the I/O module out of the rear of the chassis until it reaches the module stop latches. 3 1 2 Figure 5. Releasing the existing I/O module
![](/manual_guide/products/hewlettpackard-proliant-8500-compaq-proliant-8500-servers-io-module-upgrade-guide-be0291d/18.png)
14
Compaq ProLiant 8500 Servers I/O Module Upgrade Guide
Removing the I/O Module
CAUTION:
If the server is equipped with a three-segment virtual power button
cable, refer to the
“
Removing the Virtual Power Button Cable
”
section at the end
of this guide for further instructions before continuing with this section.
Removing the I/O module without disconnecting the virtual power button cable
can damage the cable.
1. Push in on the sides of the cam levers
on the I/O module and rotate
the top levers downward
.
2. Pull the I/O module out of the rear of the chassis
until it reaches the
module stop latches.
3
2
1
Figure 5.
Releasing the existing I/O module