HP ProLiant 8500 Compaq ProLiant 8500 Servers I/O Module Upgrade Guide - Page 35
Removing the Virtual Power Button Cable, Removing Cable Segment
View all HP ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Compaq ProLiant 8500 Servers I/O Module Upgrade Guide 31 Removing the Virtual Power Button Cable If the server was installed with a three-segment virtual power button cable, the cable must be removed. Each segment of the virtual power button cable is labeled A through C and has factory-installed self-adhesive cable guides. NOTE: Refer to the Compaq Remote Insight Lights-Out Edition User Guide for additional information on the virtual power button feature of the option board. Removing Cable Segment A Cable segment A of the virtual power button cable is located in the media module. Viewing the server from the front, remove the media module by following these steps: 1. Loosen the thumbscrews on the front of the rack. Figure 20. Loosening the rack thumbscrews