HP ProLiant 8500 Compaq ProLiant 8500 Servers I/O Module Upgrade Guide - Page 43
Removing Cable Segment C, on the I/O module and rotate
![]() |
View all HP ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Compaq ProLiant 8500 Servers I/O Module Upgrade Guide 39 Removing Cable Segment C Cable segment C of the virtual power button cable is situated in the I/O module and connects to cable segment B located in the system midplane. Viewing the server from the rear, slide the I/O module out of the server several inches by following these steps: 1. Push in on the sides of the cam levers on the I/O module and rotate the top of the levers downward . 2. Pull the I/O module out of the chassis to gain access to the system midplane. 1 2 3 Figure 32. Gaining access to the I/O module 3. Open the air baffle.
![](/manual_guide/products/hewlettpackard-proliant-8500-compaq-proliant-8500-servers-io-module-upgrade-guide-be0291d/43.png)
Compaq ProLiant 8500 Servers I/O Module Upgrade Guide
39
Removing Cable Segment C
Cable segment C of the virtual power button cable is situated in the I/O
module and connects to cable segment B located in the system midplane.
Viewing the server from the rear
,
slide the I/O module out of the server several
inches by following these steps:
1. Push in on the sides of the cam levers
on the I/O module and rotate
the top of the levers downward
.
2. Pull the I/O module out of the chassis
to gain access to the system
midplane.
3
1
2
Figure 32.
Gaining access to the I/O module
3. Open the air baffle.