HP ProLiant 8500 Compaq ProLiant 8500 Servers I/O Module Upgrade Guide - Page 31
Connecting the Cable Management Arm and Cables, the thumbscrew
View all HP ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Compaq ProLiant 8500 Servers I/O Module Upgrade Guide 27 4. Slide the server into the rack. 5. Secure the server to the rack. Connecting the Cable Management Arm and Cables 1. Connect the cable management arm to the server , and secure it using the thumbscrew . 1 2 Figure 19. Connecting the cable management arm NOTE: For clarity, the cable management arm is not shown. IMPORTANT: If a Remote Insight Lights-Out Edition board is installed, do not connect the mouse and keyboard cables to the board. These signals are provided through the ProLiant DL760 Remote Insight Lights-Out Edition adapter cable. NOTE: If a Remote Insight Lights-Out Edition board is installed, you can connect the auxiliary power cable to provide a redundant power supply to the board. 2. Connect any cables or power cords that were disconnected from the server at the beginning of the procedure.