HP ProLiant BL35p ProLiant BL35p Server Blade Maintenance and Service Guide
HP ProLiant BL35p Manual
View all HP ProLiant BL35p manuals
Add to My Manuals
Save this manual to your list of manuals |
HP ProLiant BL35p manual content summary:
- HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 1
HP ProLiant BL35p Server Blade Maintenance and Service Guide Part Number 379103-007 February 2007 (Seventh Edition) - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 2
© Copyright 2005-2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 3
board assembly...27 Server blade blanks...28 HP BladeSystem p-Class sleeve ...28 HP BladeSystem p-Class sleeve board ...29 Diagnostic tools ...31 Troubleshooting resources ...31 HP Insight Diagnostics...31 Survey Utility ...31 Integrated Management Log ...32 HP Instant Support Enterprise Edition - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 4
maintenance switch...37 Sleeve board and server blade LED locations 37 Local I/O cable ...38 Server blade enclosure bay numbering ...38 Server blade enclosure compatibility...39 Specifications ...40 Environmental specifications ...40 Server blade specifications ...40 Acronyms and abbreviations...41 - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 5
to send the defective part back to HP, unless otherwise instructed. • Available for most HP products currently under warranty or contract. For information on the warranty service, refer to the HP website (http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html). For more information - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 6
ATA models Server blade exploded view HP BladeSystem p-Class sleeve and blanks exploded view Illustrated parts catalog 6 - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 7
GHz AMD Opteron™ dual-core Fan assembly NIC riser board, mezzanine Power converter module Memory DIMMs a) DIMM, 512-MB, PC3200 DDR 400-MHz SDRAM b) DIMM, 1-GB Hardware kit a) 3U server blade blank b) Drive cage assembly HP BladeSystem p-Class sleeve access panel Spare part number 381803-001 - 381836 - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 8
12 HP BladeSystem p-Class sleeve board 13 Air baffle (dual-core processor systems only) 14 Cable kit * a) Power button/LED cable b) Hard drive cable 15 Replacement battery, 3-V lithium * 16 Local I/O cable * *Not shown SAS models Server blade exploded view Spare part number 361746 - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 9
HP BladeSystem p-Class sleeve and blanks exploded view Spare parts list (SAS models) NOTE: Always retain the server blade handle. The handle contains a serial number that maintains the original server blade NIC riser board, mezzanine Power converter module Memory DIMMs a) DIMM, 512-MB, PC3200 DDR - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 10
36-GB SAS b) 72-GB SAS c) 146-GB SAS 10 Hardware kit a) 3U server blade blank b) Drive cage assembly * c) Latch release, spring, and screw * 11 HP BladeSystem p-Class sleeve access panel 12 HP BladeSystem p-Class sleeve board 13 Air baffle (dual-core processor systems only) 14 Cable - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 11
Server blade handle ...26 System board assembly...27 Server blade blanks...28 HP BladeSystem p-Class sleeve ...28 HP BladeSystem p-Class sleeve board...29 Safety considerations Before performing service Avoid hand contact by transporting and storing products in static-safe containers. • Keep - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 12
Power down the server blade (on page 13). For non-hot-plug service procedures, use the methods available to power down the server blade. • Remove the server blade (on page 13). Access to internal server blade components requires removal from the server blade enclosure and HP ProLiant p-Class sleeve - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 13
iLO. After initiating a manual or virtual power down command, be sure that the server blade firmware, refer to the HP website (http://www.hp.com/go/support). Remove the server blade 1. Back up all server blade data. 2. Power down the server blade (on page 13). 3. Remove the server blade from the HP - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 14
drive cage assembly. To replace the component, reverse the removal procedure. ATA hard drive option To remove the component: 1. Power down the server blade (on page 13). 2. Remove the server blade (on page 13). 3. Remove the ATA drive cage assembly (on page 14). Removal and replacement procedures 14 - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 15
device ID is determined by the hard drive connection to the hard drive cable. SAS drive cage assembly To remove the component: 1. Power down the server blade (on page 13). 2. Remove the server blade (on page 13). Removal and replacement procedures 15 - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 16
assembly. To replace the component, reverse the removal procedure. SAS hard drive option To remove the component: 1. Power down the server blade (on page 13). 2. Remove the server blade (on page 13). 3. Remove the SAS drive cage assembly (on page 15). 4. Remove the cover plate and, if necessary, the - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 17
as the primary hard drive bay and must be populated first. SAS controller and cables To remove the component: 1. Power down the server blade (on page 13). 2. Remove the server blade (on page 13). 3. Disconnect the hard drive cables from the hard drives. Removal and replacement procedures 17 - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 18
the SAS controller. To replace the component, reverse the removal procedure. Air baffle (dual-core processor models only) To remove the component: 1. Power down the server blade (on page 13). 2. Remove the server blade (on page 13). Removal and replacement procedures 18 - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 19
a dual-core processor. To replace the component, reverse the removal procedure. DIMMs To remove the component: 1. Power down the server blade (on page 13). 2. Remove the server blade (on page 13). 3. For DIMM bank B, remove the air baffle. ("Air baffle (dual-core processor models only)" on page - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 20
the component, reverse the removal procedure. CAUTION: Use only HP DIMMs. DIMMs from other sources may adversely affect data integrity. a populated memory bank, for best performance. Processor To remove the component: 1. Power down the server blade (on page 13). 2. Remove the server blade (on page - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 21
the socket. CAUTION: The processor is designed to fit one way into the socket. Use the alignment guides on the processor and socket to properly align the processor with the socket. Refer to the server blade hood label for specific instructions. CAUTION: Do not bend or damage the pins beneath the - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 22
CAUTION: Be sure that the processor socket locking lever is closed after the processor is installed. The lever should close without resistance. Forcing the lever closed can damage the processor and socket, requiring system board replacement. 2. Close the processor locking lever. 3. Remove the - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 23
, be sure the correct processor air baffle is installed at all times. Fan assembly To remove the component: 1. Power down the server blade (on page 13). 2. Remove the server blade (on page 13). 3. Remove the air baffle ("Air baffle (dual-core processor models only)" on page 18). NOTE: Dual-core - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 24
the component, reverse the removal procedure. Dual Port Fibre Channel Adapter (2 GB) To remove the component: 1. Power down the server blade (on page 13). 2. Remove the server blade (on page 13). 3. Remove the FC adapter. To replace the component, reverse the removal procedure. NIC riser board To - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 25
board. To replace the component, reverse the removal procedure. Power converter module To remove the component: 1. Power down the server blade (on page 13). 2. Remove the server blade (on page 13). 3. Remove the power converter module. WARNING: To reduce the risk of personal injury from hot surfaces - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 26
. To replace the component, reverse the removal procedure. Server blade handle The server blade handle contains a serial number that maintains the original server blade warranty. When replacing a system board assembly, remove the server blade handle and install it on the replacement system board - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 27
NIC riser board ("NIC riser board" on page 24). NOTE: Always retain the server blade handle. The handle contains a serial number that maintains the original server blade warranty. 9. Remove the server blade handle ("Server blade handle" on page 26). To replace the component, reinstall all removed - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 28
remove the 3U server blade blank: HP BladeSystem p-Class sleeve To remove the component: 1. Power down the server blade (on page 13). 2. Remove the server blade (on page 13). 3. Remove the second server blade, if installed. 4. Remove any 3U server blade blanks, if installed ("Server blade blanks" on - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 29
sleeve. To replace the component, reverse the removal procedure. HP BladeSystem p-Class sleeve board To remove the component: 1. Remove the HP BladeSystem p-Class sleeve ("HP BladeSystem p-Class sleeve" on page 28). 2. Remove the HP BladeSystem p-Class sleeve access panel. Removal and replacement - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 30
3. Remove the HP BladeSystem p-Class sleeve board. To replace the component, reverse the removal procedure. Removal and replacement procedures 30 - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 31
Integrated Management Log ...32 HP Instant Support Enterprise Edition ...32 Web-Based Enterprise Service ...32 Open Services Event Manager...33 Troubleshooting resources The HP ProLiant Servers Troubleshooting Guide provides simple procedures for resolving common problems as well as a comprehensive - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 32
every SmartStart-assisted installation or can be installed through the HP PSP. NOTE: The current version of SmartStart provides the memory spare part numbers for the server blade. To download the latest version, see the HP website (http://www.hp.com/go/ssdownloads). Integrated Management Log The IML - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 33
and remotely through ISEE for OpenVMS, Tru64, and Microsoft® Windows® operating system binary error logs. For more information, refer to the HP website (http://h18000.www1.hp.com/support/svctools/). Open Services Event Manager OSEM is a standalone tool that performs real-time reactive and proactive - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 34
Component identification In this section Server blade components ...34 Sleeve board and server blade LED locations 37 Local I/O cable ...38 Server blade enclosure bay numbering ...38 Server blade enclosure compatibility ...39 Server blade components Front panel components and LEDs Item 1 2 3 - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 35
(auxiliary power available) Off = Off 7 Local I/O port** - * Actual NIC numeration depends on several factors, including the operating system installed on the server blade. ** The Local I/O port is used with the local I/O cable for local management and for connecting external devices to the - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 36
Internal components Item 1 2 3 4 5 6 7 8 9 10 11 Description Fan assembly connectors (2) Processor socket 2 DIMM bank A (populated) Adapter card connectors (2) Battery Processor socket 1 (populated) DIMM bank B Hard drive cable connector System maintenance switch (SW1) Fan assembly Hard drive cage - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 37
= iLO security is disabled. Off = System configuration can be changed. On = System configuration is locked. Reserved Reserved Off = Power-on password is enabled. On = Power-on password is disabled. Off = No function On = Clear configuration S7, S8 Off, Off Reserved Sleeve board and server blade - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 38
Ethernet to the server blade iLO interface from a client device Server blade enclosure bay numbering Each server blade enclosure requires bays of the server blade enclosure. Be sure to review server blade bay numbering to determine the HP ProLiant BL35p Server Blade external network connections on - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 39
Server blade enclosure compatibility The HP ProLiant BL35p Server Blades require the support of an HP BladeSystem p-Class sleeve in a server blade enclosure with enhanced backplane components (enhanced server blade enclosure). The enhanced server blade enclosure also provides a single rear iLO - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 40
based on a maximum temperature of 45°C (113°F). Altitude maximum for storage corresponds to a pressure minimum of 70 KPa. Server blade specifications Specification Height Depth Width Weight (maximum) Weight (no drives installed) Value 4.1 cm (1.61 in) 64.4 cm (25.35 in) 12.0 cm (4.72 in) 3.72 kg - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 41
electrostatic discharge FC Fibre Channel I/O input/output iLO Integrated Lights-Out IML Integrated Management Log IP Internet Protocol ISEE Instant Support Enterprise Edition LED light-emitting diode NIC network interface controller OSEM Open Services Event Manager POST Power-On Self Test Acronyms - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 42
PSP ProLiant Support Pack RBSU ROM-Based Setup Utility RILOE Remote Insight Lights-Out Edition ROM read-only memory SFP small form-factor pluggable SIM Systems Insight Manager SNMP Simple Network Management Protocol UID unit identification WEBES Web-Based Enterprise Service Acronyms and - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 43
31 Instant Support Enterprise Edition 32 internal components 36 L LED, power button 34 LEDs 34 LEDs, hard drive 34 LEDs, unit identification (UID) 34 local I/O cable 38 M management tools 31 memory slots 36 N NIC riser board 24 O Open Services Event Manager 33 P part numbers 5, 7, 9 power button - HP ProLiant BL35p | ProLiant BL35p Server Blade Maintenance and Service Guide - Page 44
11 SAS connector 17 SAS drives 16 SAS hard drive cabling 17 serial port 38 server blade bay blank 28 server blade enclosure 39 sleeve, HP BladeSystem p-Class 28, 37 specifications 40 specifications, environmental 40 Standby mode, entering 13 static electricity 11 Survey Utility 31 system board 27
HP ProLiant BL35p Server Blade
Maintenance and Service Guide
Part Number 379103-007
February 2007 (Seventh Edition)