HP ProLiant BL35p ProLiant BL35p Server Blade Maintenance and Service Guide - Page 14
ATA drive cage assembly, ATA hard drive option
![]() |
View all HP ProLiant BL35p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
ATA drive cage assembly To remove the component: 1. Power down the server blade (on page 13). 2. Remove the server blade (on page 13). 3. Remove the drive cage assembly. IMPORTANT: Be sure to disconnect the hard drive cable from the system board before removing the drive cage assembly. To replace the component, reverse the removal procedure. ATA hard drive option To remove the component: 1. Power down the server blade (on page 13). 2. Remove the server blade (on page 13). 3. Remove the ATA drive cage assembly (on page 14). Removal and replacement procedures 14
![](/manual_guide/products/hewlettpackard-proliant-bl35p-proliant-bl35p-server-blade-maintenance-service-guide-eeb4f8e/14.png)
Removal and replacement procedures
14
ATA drive cage assembly
To remove the component:
1.
Power down the server blade (on page
13
).
2.
Remove the server blade (on page
13
).
3.
Remove the drive cage assembly.
IMPORTANT:
Be sure to disconnect the hard drive cable from the system board before
removing the drive cage assembly.
To replace the component, reverse the removal procedure.
ATA hard drive option
To remove the component:
1.
Power down the server blade (on page
13
).
2.
Remove the server blade (on page
13
).
3.
Remove the ATA drive cage assembly (on page
14
).