HP ProLiant BL620c HP BladeSystem c-Class architecture - Page 9
Connectivity between blades and interconnect modules
View all HP ProLiant BL620c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Figure 7. Sets of four traces of the signal midplane can be used for 1-, 2- , or 4-lane standard protocols. Connectivity between blades and interconnect modules The c-Class server blades use mezzanine cards to connect to various network fabrics. The mezzanine cards on the server blades connect to the interconnect modules through independent traces on the NonStop signal midplane. Connections differ depending on the enclosure. The c7000 enclosure was designed for fully redundant connections between the server blades and interconnect modules. Figure 8 shows how halfheight server blades connect to the interconnect bays in the c7000 enclosure. Figure 8. Redundant connection of half-height server blades to the interconnect bays in the c7000 enclosure 9