HP ProLiant DL4x170h HP ProLiant Lights Out-100 User Guide For HP ProLiant G6 - Page 24
Specific commands, DCMI 1.0 support
View all HP ProLiant DL4x170h manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Verbs cd version exit show reset load help /./map1/firmware/-> show fwversion fwversion=0.59 /./map1/firmware/-> fwversion Invalid command /./map1/firmware/-> Specific commands CLP syntax for specific commands is found in the sections that also describe the functionality through the Web interface. DCMI 1.0 support LO100 supports Data Center Manageability Interface (DCMI). DCMI enables you to simplify platform management implementations while enhancing robustness. Specifications are derived from Intelligent Platform Management Interface (IPMI) 2.0, which has been widely adopted by the computing industry for server management and system-health monitoring. For more information, see the Intel website at http://developer.intel.com/technology/product/DCMI/index.htm. IPMI 2.0 support LO100 supports the industry-standard IPMI 2.0. The IPMI specification defines standardized, abstracted interfaces that can be used for monitoring and control functions that are built in to the platform hardware. In addition to supporting the mandatory commands for IPMI 2.0, the following additional IPMI 2.0 features are supported by LO100: • Additional IPMI 2.0 commands ◦ Get Channel Cipher Suites ◦ Set/Get Channel Security Keys ◦ Suspend/Resume Payload Encryption • Payload types ◦ IPMI Message ◦ RMCP+ Open Session Request/Response ◦ RAKP Message 1 / 2 ◦ RAKP Message 3 / 4 • Authentication algorithms ◦ RAKP-none ◦ RAKP-HMAC-SHA1 24 Using LO100