HP ProLiant SL270s HP ProLiant SL270s Gen8 Server User Guide - Page 64

Retaining the recovery key/password

Get HP ProLiant SL270s PDF manuals and user guides View all HP ProLiant SL270s manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

8. Install the TPM board. Press down on the connector to seat the board ("System board components" on page 9). 9. Install the TPM security rivet by pressing the rivet firmly into the system board. 10. Install all components removed from the server. 11. Install the server into the chassis ("Installing the server into the chassis" on page 23). 12. Power up the server (on page 15). Retaining the recovery key/password The recovery key/password is generated during BitLocker™ setup, and can be saved and printed after BitLocker™ is enabled. When using BitLocker™, always retain the recovery key/password. The recovery key/password is required to enter Recovery Mode after BitLocker™ detects a possible compromise of system integrity. To help ensure maximum security, observe the following guidelines when retaining the recovery key/password: • Always store the recovery key/password in multiple locations. Hardware options installation 64

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
Hardware options installation 64
8.
Install the TPM board. Press down on the connector to seat the board ("
System board components
" on
page
9
).
9.
Install the TPM security rivet by pressing the rivet firmly into the system board.
10.
Install all components removed from the server.
11.
Install the server into the chassis ("
Installing the server into the chassis
" on page
23
).
12.
Power up the server (on page
15
).
Retaining the recovery key/password
The recovery key/password is generated during BitLocker™ setup, and can be saved and printed after
BitLocker™ is enabled. When using BitLocker™, always retain the recovery key/password. The recovery
key/password is required to enter Recovery Mode after BitLocker™ detects a possible compromise of system
integrity.
To help ensure maximum security, observe the following guidelines when retaining the recovery
key/password:
•
Always store the recovery key/password in multiple locations.