HP ProSignia 500 Compaq ProSignia Family of PC Servers Maintenance and Service - Page 37
Table 3-14. Advanced VGA Board Test Error Codes
View all HP ProSignia 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
1901-xx Tape servo write failed 1. Replace the tape cartridge and retest. 1902-xx Tape format failed 2. Check and/or replace the signal cable and retest. 1903-xx Tape drive sensor test 3. Check the switch settings on the failed adapter board (if applicable). 4. Replace the tape adapter board 1904-xx Tape BOT/EOT test failed (if applicable) and retest. 5. Replace the tape drive and 1905-xx Tape read test failed retest. 6. Replace the system board and 1906-xx Tape write/read/compare retest. test failed Table 3-14. Advanced VGA Board Test Error Codes Error Description Recommended Action Code 2402-xx Video memory test failed The following steps apply to error codes 2402-xx through 2456-xx: 2403-xx Video attribute test 1. Run the Configuration utility. failed 2. Replace the monitor and retest. 3. Replace the Advanced VGA board or 2404-xx Video character set test other video board and retest. failed 4. Replace the system board and retest. 2405-xx Video 80 x 25 mode 9 x 14 character cell test failed 2406-xx Video 80 x 25 mode 8 x 8 character cell test failed 2407-xx Video 40 x 25 mode test failed 2408-xx Video 320 x 320 mode color set 0 test failed 2409-xx Video 320 x 320 mode color set 1 test failed 2410-xx Video 640 x 200 mode test failed 2411-xx Video screen memory page test failed 2412-xx Video gray scale test failed 2414-xx Video white screen test failed 2416-xx Video noise pattern test failed