HP Rp5700 Troubleshooting Guide - Page 59
Control panel message, Description, Recommended action, Network Server Mode Active and No
UPC - 884420470731
View all HP Rp5700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Table A-1 Numeric Codes and Text Messages (continued) Control panel message Description Recommended action Invalid Electronic Serial Number Electronic serial number has become corrupted. 1. Run Computer Setup. If Setup already has data in the field or will not allow the serial number to be entered, download the executable file from http://www.hp.com. 2. Run Computer Setup and try to enter serial number under Security, System ID, then save changes. Memory Parity Error Parity RAM failure. Run Computer Setup and Diagnostic utilities. Third-party graphics card may be causing a Remove third-party graphics card to see if the problem. problem goes away. Network Server Mode Active and No Keyboard Attached Keyboard failure while Network Server Mode 1. Reconnect keyboard with computer enabled. turned off. 2. Check connector for bent or missing pins. 3. Ensure that none of the keys are depressed. 4. Replace keyboard. Parity Check 2 Parity RAM failure. Run Computer Setup and Diagnostic utilities. Third-party graphics card may be causing a Remove third-party graphics card to see if the problem. problem goes away. System will not boot without fan CPU fan not installed or disconnected in VSFF chassis. 1. Remove the computer cover, press the power button, and see if the processor fan spins. If the processor fan is not spinning, make sure the fan's cable is plugged onto the system board header. Ensure the heatsink is properly seated and installed. 2. If the fan is plugged in and the heatsink is properly seated but the fan does not spin, then replace the heatsink-fan assembly. ENWW POST Numeric Codes and Text Messages 53