HP SW TL881 DLT Mini-Lib/1 Compaq StorageWorks TL881/TL891 Family MiniLibrary
HP SW TL881 DLT Mini-Lib/1 Manual
 |
View all HP SW TL881 DLT Mini-Lib/1 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP SW TL881 DLT Mini-Lib/1 manual content summary:
- HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 1
TL881/TL891 Family MiniLibrary System Drive Upgrade Procedure Second Edition (July 2000) Part Number 127511-002 Compaq Computer Corporation - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 2
Notice © 2000 Compaq Computer Corporation. Compaq, the Compaq logo, and StorageWorks Registered in U. S. Patent and Trademark Office. All other product names mentioned herein may be trademarks or registered trademarks of their respective companies. Compaq shall not be liable for technical or - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 3
Contents About This Guide Text Conventions...v Symbols in Text...vi Symbols on Equipment vi Getting Help ...vii Compaq Technical Support vii Compaq Website viii Compaq Authorized Reseller viii Adding a Second Drive Introduction ...1 Parts Location ...2 General Procedure ...3 Removing and - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 4
iv Compaq StorageWorks TL881/TL891 Family MiniLibrary System Drive Upgrade Procedure List of Figures Figure 1. Parts location 2 Figure 2. Removing the skin cover 4 Figure 3. Removing the cover plate 6 Figure 4. Drive caddy 7 List of Tables Table 1 Parts Location 2 - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 5
About This Guide This guide is designed to be used as step-by-step instructions for upgrading and as a reference for future upgrades. Text Conventions This document uses the following conventions to distinguish elements of text: Keys USER INPUT FILENAMES - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 6
may be found in the text of this guide. They have the following meanings. WARNING: Text this manner presents clarifying information or specific instructions. NOTE: Text set off in this electrical shock hazards. Enclosed area contains no operator serviceable parts. WARNING: To reduce the risk of - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 7
health and safety requirements and guidelines for manual material handling. Getting Help If you have a problem and have exhausted the information in this guide, you can get further information and other help in the following locations. Compaq Technical Support You are entitled to free hardware - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 8
America, call the Compaq Technical Phone Support Center at 1-800-OK-COMPAQ1. This service is available 24 hours a day, 7 days a week. Outside North America, call the nearest Compaq Technical Support Phone Center. Telephone numbers for world wide Technical Support Centers are listed on the Compaq - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 9
Adding a Second Drive Introduction This guide explains how to add a second tape drive to the Compaq StorageWorks TL881/TL891 Family MiniLibrary SystemTM. IMPORTANT: All screws that do not use lock washers, - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 10
2 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Drive Upgrade Procedure Parts Location Figure 1 shows the location of most of the field-replaceable parts. 5 6 4 3 2 1 7 14 13 12 11 10 Figure 1. Parts location 8 9 SHR-1719 Figure Legend 1 2 3 4 5 6 7 8 9 Table 1 Parts Location - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 11
part of an expanded TL881/TL891 Family MiniLibrary System, refer to the Compaq StorageWorks TL881/TL890/TL891 Family MiniLibrary System Maintenance and Service Guide for information on removing the Base Module from the MiniLibrary system. To add a second drive to the Base Module: 1. Remove the skin - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 12
4 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Drive Upgrade Procedure Removing and Replacing the Skin Cover (Desktop Models Only) The skin cover is held in place by two screws on each side of the Base Module (Figure 2). Figure 2. Removing the skin cover SHR-1720 Removing To remove - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 13
Adding a Second Drive 5 Replacing To replace the skin cover on the Base Module: 1. Slide the skin cover over the module until it touches the front panel. 2. Insert the four screws (2 each side) through the skin cover into the Base Module. Do not tighten the screws yet. 3. Position the front edge of - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 14
6 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Drive Upgrade Procedure Replacing To replace the cover plate on the Base Module: 1. Place the cover plate on the Base Module so that it overhangs one-half inch at the rear of the module (Figure 3). 2. Slide the cover plate toward the front - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 15
Adding a Second Drive 7 Removing To remove the drive caddy assembly from the Base Module: 1. Remove the cover plate as described in "Removing and Replacing the Cover Plate." 2. Disconnect the SCSI cable connectors ( 1 Figure 4) from the controller SCSI extension cable. 5 7 2 7 1 5 3 6 4 4 - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 16
8 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Drive Upgrade Procedure 3. Disconnect the drive power Y cable 2 from the power supply connector. 4. Disconnect the drive 1 RS-422 cable 3 from the controller PWB end. 5. Remove two M4 x 8 mm flat-head screws 4 from along the upper edge of - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 17
Adding a Second Drive 9 4. Connect the drive 0 and drive 1 RS-422 cables 3 to the controller PWB. 5. Connect the drive power cable 2 to the power supply connector. 6. Connect the SCSI cable connectors 1 to the controller SCSI extension cable. 7. Replace the cover plate as described in "Removing and - HP SW TL881 DLT Mini-Lib/1 | Compaq StorageWorks TL881/TL891 Family MiniLibrary - Page 18
10 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Drive Upgrade Procedure 8. Connect the unused connector on the SCSI cable to the drive just installed. 9. Install the RS-422 cable supplied with the kit, sliding it under the clamps so that the connector is adjacent to the connector on top
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
 |
 |
TL881/TL891 Family MiniLibrary
System Drive
Upgrade Procedure
Second Edition (July 2000)
Part Number 127511-002
Compaq Computer Corporation