HP Scitex FB700 HP Scitex FB500 and FB700 Printer Series - User Cleaning Instr - Page 28

Drain waste from service station (quarterly), Proceed

Get HP Scitex FB700 PDF manuals and user guides View all HP Scitex FB700 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

5. Remove the screw (A in the figure below) that secures the wiper clamp to the wiper assembly. 6. Separate the two wiper clamp halves and remove the original wiper blade. 7. Install the replacement wiper blade in the orientation shown below. Figure 25 Wiper clamp screw 8. Secure the wiper blade clamp to the wiper assembly using the original screw. 9. To reset the maintenance counter for this task and complete the procedure, press Proceed. Drain waste from service station (quarterly) Waste ink accumulates in the service station until drained. Dispose of the collected ink according to local regulations. 1. Place the waste ink container (included with the printer) beneath the waste ink spigot, under the media drive belt at the service end of the printer. 2. From the control panel (System page > Tools > User Cleaning and Maintenance), select Drain Waste from Service Station. 3. Press Proceed to continue. 26 User cleaning ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
5.
Remove the screw (A in the figure below) that secures the wiper clamp to the wiper assembly.
6.
Separate the two wiper clamp halves and remove the original wiper blade.
7.
Install the replacement wiper blade in the orientation shown below.
Figure 25
Wiper clamp screw
8.
Secure the wiper blade clamp to the wiper assembly using the original screw.
9.
To reset the maintenance counter for this task and complete the procedure, press
Proceed
.
Drain waste from service station (quarterly)
Waste ink accumulates in the service station until drained. Dispose of the collected ink according to
local regulations.
1.
Place the waste ink container (included with the printer) beneath the waste ink spigot, under the
media drive belt at the service end of the printer.
2.
From the control panel (
System page > Tools > User Cleaning and Maintenance
), select
Drain Waste from Service Station
.
3.
Press
Proceed
to continue.
26
User cleaning
ENWW