HP Server Console 0x2x8 KVM Server Console Switch Maintenance and Service Guid - Page 28
Removal and replacement procedure tips, Removing the console switch, Replacing the console switch
View all HP Server Console 0x2x8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Removal and replacement procedure tips After completing all necessary removal and replacement procedures, power on any attached devices to be sure that all components are operating properly. IMPORTANT: As you are removing the console switch components, be sure to retain the screws in a safe place and separate them according to their type. Removing the console switch 1. Power down the console switch and any attached devices. 2. Disconnect all cabling. NOTE: Identification labels are provided on the UTP CAT5 cables to mark the ports to which they are connected. 3. Remove the console switch. Replacing the console switch 1. Mount the console switch in the rack. 2. Connect the expansion module ("Replacing the expansion module" on page 42). 3. Connect the interface adapter ("Replacing the interface adapter" on page 43). 4. Power on the console switch. The activity indicator light powers on. 5. Power on the monitor. 6. Power up the server. 7. Update the console switch firmware ("Updating the console switch firmware" on page 59). 8. Update the interface adapter firmware. ("Updating the interface adapter firmware" on page 60) 9. Update the cascaded console switch firmware, if necessary ("Updating the cascaded console switch firmware" on page 59). The following figure shows one possible configuration for your console switch system. Removal and replacement procedures 28