HP Special Edition L2005CM HP Special Edition L2000 Notebook PC and Compaq Pre - Page 122
Remove the four PM2.0×5.0 screws, that secure the system
View all HP Special Edition L2005CM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Removal and Replacement Procedures 4. Turn the top cover upside down with the front toward you. 5. Release the ZIF connector 1 to which the LED board cable is connected and disconnect the cable 2 from the system board. 6. Remove the four PM2.0×5.0 screws 3 that secure the system board to the top cover. Disconnecting the LED Board Cable and Removing the System Board Screws 5-44 Maintenance and Service Guide
5–44
Maintenance and Service Guide
Removal and Replacement Procedures
4. Turn the top cover upside down with the front toward you.
5.
Release the ZIF connector
1
to which the LED board cable is
connected and disconnect the cable
2
from the system board.
6.
Remove the four PM2.0×5.0 screws
3
that secure the system
board to the top cover.
Disconnecting the LED Board Cable and Removing the System
Board Screws