HP Special Edition L2005CM HP Special Edition L2000 Notebook PC and Compaq Pre - Page 94

Remove the wireless communications module, socket rises up.

Page 94 highlights

Removal and Replacement Procedures ✎ Make note of which wireless antenna cable is attached to which antenna clip on the Mini PCI communications module before disconnecting the cables. 5. Disconnect the wireless antenna cables 1 from the Mini PCI communications module. 6. Spread the two retaining tabs 2 that secure the Mini PCI communications module to the communications compartment socket. (The side of the module opposite the socket rises up). 7. Remove the wireless communications module 3 by pulling the module away from the socket at a 45-degree angle. ✎ Wireless communication modules are designed with a notch 4 to prevent incorrect installation into the Mini PCI socket. Removing a Mini PCI Communications Module Reverse the above procedure to install a Mini PCI communications module. 5-16 Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176

5–16
Maintenance and Service Guide
Removal and Replacement Procedures
Make note of which wireless antenna cable is attached to
which antenna clip on the Mini PCI communications module
before disconnecting the cables.
5. Disconnect the wireless antenna cables
1
from the Mini PCI
communications module.
6. Spread the two retaining tabs
2
that secure the Mini PCI
communications module to the communications
compartment socket. (The side of the module opposite the
socket rises up).
7. Remove the wireless communications module
3
by pulling
the module away from the socket at a 45-degree angle.
Wireless communication modules are designed with a notch
4
to prevent incorrect installation into the Mini PCI socket.
Removing a Mini PCI Communications Module
Reverse the above procedure to install a Mini PCI
communications module.