HP Spectre 12-a000 Maintenance and Service Guide - Page 37
Display panel cable, Detach the display panel cable
View all HP Spectre 12-a000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Display panel cable Description Display panel cable (includes adhesive support strip and double-sided adhesive) Spare part number 830337-001 Before removing the display panel cable, follow these steps: 1. Turn off the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then shut it down through the operating system. 2. Disconnect the power from the slate by unplugging the power cord from the slate. 3. Disconnect all external devices from the slate. 4. Remove the display panel assembly (see Display panel assembly on page 20). Remove the display panel cable: 1. Disconnect the display panel cable (1) from the system board. 2. Release the ZIF connector (2) to which the display panel ribbon cable is attached, and then disconnect the display panel ribbon cable from the TouchScreen board. 3. Detach the display panel cable (3) from the back cover. (The display panel cable is attached to the back cover with double-sided adhesive.) 4. Release the display panel cable from the retention clips (4) built into the battery. 5. Remove the display panel cable (5). Reverse this procedure to install the display panel cable. Component replacement procedures 27