HP Spectre 12-a000 Maintenance and Service Guide - Page 45
WLAN antenna, The WLAN Main/#1antenna cable is connected to the WLAN module Main terminal.
View all HP Spectre 12-a000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
3. Remove the 3D camera board (3) and cable. 4. Remove the 3D camera board and cable. Reverse this procedure to install the 3D camera board. WLAN antenna Description WLAN auxiliary antenna (includes cable, auxiliary transceiver, and double-sided adhesive) WLAN main antenna (includes cable, main transceiver, and double-sided adhesive) Spare part number 830329-001 830330-001 Before removing the WLAN antenna, follow these steps: 1. Turn off the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then shut it down through the operating system. 2. Disconnect the power from the slate by unplugging the power cord from the slate. 3. Disconnect all external devices from the slate. 4. Remove the display panel assembly (see Display panel assembly on page 20). Remove the WLAN antenna: 1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module built onto the system board. NOTE: The WLAN "Main/#1"antenna cable is connected to the WLAN module "Main" terminal. The WLAN "Aux/#2"antenna cable is connected to the WLAN module "Aux" terminal. 2. Detach the WLAN antenna transceivers (2) from the back cover. (The WLAN antenna transceivers are attached to the back cover with double-sided adhesive.) Component replacement procedures 35