HP Spectre 12-a000 Maintenance and Service Guide - Page 43
Rear-facing webcam, Detach the rear-facing webcam
View all HP Spectre 12-a000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Rear-facing webcam Description Rear-facing webcam (includes cable and double-sided adhesive) Spare part number 830349-001 Before removing the front-facing webcam, follow these steps: 1. Turn off the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then shut it down through the operating system. 2. Disconnect the power from the slate by unplugging the power cord from the slate. 3. Disconnect all external devices from the slate. 4. Remove the display panel assembly (see Display panel assembly on page 20). Remove the rear-facing webcam: 1. Release the ZIF connector (1) to which the rear-facing webcam cable is attached, and then disconnect the rear-facing webcam cable from the system board. 2. Detach the rear-facing webcam (2) from the back cover. (The rear-facing webcam is attached to the back cover with double-sided adhesive.) 3. Remove the rear-facing webcam and cable. Reverse this procedure to install the rear-facing webcam. Component replacement procedures 33