HP Spectre 12-a000 Maintenance and Service Guide - Page 48
Kickstand, and hinges up until they rest midway in the back cover.
View all HP Spectre 12-a000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Kickstand Description Kickstand Spare part number 830338-001 Before removing the kickstand, follow these steps: 1. Turn off the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then shut it down through the operating system. 2. Disconnect the power from the slate by unplugging the power cord from the slate. 3. Disconnect all external devices from the slate. 4. Remove the display panel assembly (see Display panel assembly on page 20). 5. Remove the speakers (see Speakers on page 29). Remove the kickstand: 1. Remove the four Phillips PM2.0×4.5 screws (1) that secure the kickstand, the hinges, and the USB port brackets to the back cover. 2. Remove the USB port brackets (2). 3. Slide the kickstand (3) and hinges up until they rest midway in the back cover. 4. Remove the four Torx TM4/2.0×3.4 screws (4) that secure the hinges to kickstand. 5. Remove the hinges (5). The hinges are available using spare part number 830340-001. 6. Remove the kickstand (6). 7. Remove the kickstand. Reverse this procedure to install the kickstand. 38 Chapter 5 Removal and replacement procedures