HP Spectre 13-h200 HP Split 13 x2 PC Maintenance and Service Guide - Page 55
WWAN module, The WWAN antenna cable labeled 5 connects to the WWAN module Main
View all HP Spectre 13-h200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
WWAN module Description HP hs3110 HSPA+ Mobile Broadband Module for use on all tablet models HP lt4112 LTE/HPSA+ Mobile Broadband Module for use only on tablet models with model numbers g200 through g299 and g100 through g199 Spare part number 723895-006 740011-006 Before removing the WWAN module, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 38). 5. Remove the tablet battery (see Tablet battery on page 40). Remove the WWAN module: 1. Disconnect the WWAN antenna cables (1) from the terminals on the WWAN module. NOTE: The WWAN antenna cable labeled "5" connects to the WWAN module "Main" terminal labeled "5". The WWAN antenna cable labeled "6" connects to the WWAN module "Aux/GPS" terminal labeled "6". 2. Remove the Phillips PM2.0×2.5 broad head screw (2) that secures the WWAN module to the system board. (The WWAN module tilts up.) Removal and replacement procedures 47