HP Spectre 13-h200 HP Split 13 x2 PC Maintenance and Service Guide - Page 63

Audio/power connector board, to which the audio/power connector board cable is

Get HP Spectre 13-h200 PDF manuals and user guides View all HP Spectre 13-h200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

Audio/power connector board Description Audio/power connector board NOTE: The audio/power connector board does not include the audio/power connector board cable. The audio/power connector board cable is included in the Cable Kit, spare part number 736883-001. See Cable Kit on page 23 for more Cable Kit spare part information. Spare part number 736887-001 Before removing the audio/power connector board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 38). 5. Remove the tablet battery (see Tablet battery on page 40). Remove the audio/power connector board: 1. Release the audio/power connector board ZIF connector (1) to which the NFC module cable is attached, and then disconnect the NFC module cable from the audio/power connector board. 2. Release the system board ZIF connector (2) to which the audio/power connector board cable is attached, and then disconnect the audio/power connector board cable from the system board. 3. Disconnect the speaker cable (3) from the audio/power connector board. 4. Remove the two Phillips PM2.0×3.0 screws (4) that secure the audio/power connector board to the display assembly. Removal and replacement procedures 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
Audio/power connector board
Description
Spare part number
Audio/power connector board
NOTE:
The audio/power connector board does not include the audio/power connector board
cable. The audio/power connector board cable is included in the Cable Kit, spare part number
736883-001. See
Cable Kit
on page
23
for more Cable Kit spare part information.
736887-001
Before removing the audio/power connector board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover
on page
38
).
5.
Remove the tablet battery (see
Tablet battery
on page
40
).
Remove the audio/power connector board:
1.
Release the audio/power connector board ZIF connector
(1)
to which the NFC module cable is
attached, and then disconnect the NFC module cable from the audio/power connector board.
2.
Release the system board ZIF connector
(2)
to which the audio/power connector board cable is
attached, and then disconnect the audio/power connector board cable from the system board.
3.
Disconnect the speaker cable
(3)
from the audio/power connector board.
4.
Remove the two Phillips PM2.0×3.0 screws
(4)
that secure the audio/power connector board to
the display assembly.
Removal and replacement procedures
55