HP Spectre 13-h200 HP Split 13 x2 PC Maintenance and Service Guide - Page 64
Vibrator module, Remove the vibrator module
View all HP Spectre 13-h200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
5. Remove the audio/power connector board (5). 6. Remove the audio/power connector board and cable. Reverse this procedure to install the audio/power connector board. Vibrator module Description Vibrator module (includes cable) Spare part number 736901-001 Before removing the vibrator module, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 38). 5. Remove the tablet battery (see Tablet battery on page 40). Remove the vibrator module: 1. Disconnect the vibrator module cable (1) from the system board. 56 Chapter 4 Removal and replacement preliminary requirements