HP Spectre 15-ap000 Maintenance and Service Guide - Page 27
Bottom cover, Position the computer upside down.
View all HP Spectre 15-ap000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Bottom cover NOTE: The bottom cover spare part kit includes 4 rubber feet. Description Bottom cover Spare part number 841260-001 Before disassembling the computer, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. Remove the bottom cover: 1. Close the computer. 2. Position the computer upside down. 3. Remove the six Torx T8M2.0×3.9 screws (1) and the two Torx T8M2.0×7.5 screws (2) that secure the bottom cover to the computer. 4. Remove the bottom cover (3) from the computer. 5. Turn the computer right side up, with the front toward you. Reverse this procedure to install the bottom cover. Bottom cover 21