HP Spectre 15-ap000 Maintenance and Service Guide - Page 42

TouchPad, Remove the TouchPad

Get HP Spectre 15-ap000 PDF manuals and user guides View all HP Spectre 15-ap000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

TouchPad Description TouchPad TouchPad cable Spare part number 806516-001 841262-001 Before removing the TouchPad, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 21). 5. Remove the battery (see Battery on page 22). Remove the TouchPad: 1. Disconnect the TouchPad cable from the system board (1). 2. Remove the five Phillips PM2.0×2.0 screws (2) that secure the TouchPad to the computer. 3. Remove the Mylar tape (3) from under the cable. 4. Remove the TouchPad (4). Reverse this procedure to install the TouchPad. 36 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
TouchPad
Description
Spare part number
TouchPad
806516-001
TouchPad cable
841262-001
Before removing the TouchPad, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
21
).
5.
Remove the battery (see
Battery
on page
22
).
Remove the TouchPad:
1.
Disconnect the TouchPad cable from the system board
(1)
.
2.
Remove the
five
Phillips PM2.0×2.0 screws
(2)
that secure the TouchPad to the computer.
3.
Remove the Mylar tape
(3)
from under the cable.
4.
Remove the TouchPad
(4)
.
Reverse this procedure to install the TouchPad.
36
Chapter 5
Removal and replacement procedures