HP Spectre 15-ap000 Maintenance and Service Guide - Page 43
System board, WLAN module see
View all HP Spectre 15-ap000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
System board NOTE: The system board spare part kit includes a graphics subsystem with UMA memory and replacement thermal material. Description Equipped with an Intel Core i7-6560U processor, 16-GB of system memory, and the Windows 10 operating system Equipped with an Intel Core i7-6560U processor, 16-GB of system memory, and a nonWindows operating system Equipped with an Intel Core i7-6500U processor, 16-GB of system memory, and the Windows 10 operating system Equipped with an Intel Core i7-6500U processor, 16-GB of system memory, and a nonWindows operating system Equipped with an Intel Core i5-6500U processor, 8-GB of system memory, and the Windows 10 operating system Equipped with an Intel Core i5-6500U processor, 8-GB of system memory, and a nonWindows operating system Equipped with an Intel Core i5-6200U processor, 8-GB of system memory, and the Windows 10 operating system Equipped with an Intel Core i5-6200U processor, 8-GB of system memory, and a nonWindows operating system Spare part number 841239-601 841239-001 841240-601 841240-001 841241-601 841241-001 841242-601 841242-001 Before removing the system board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 21). 5. Remove the battery (see Battery on page 22). 6. Remove the fan (see Fan on page 32). When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ● WLAN module (see WLAN module on page 24) ● Solid-state drive (see Solid-state drive on page 26) ● Heat sink (see Heat sink on page 30) Remove the system board: 1. Disconnect the following cables from the system board: (1) Display cable (2) Power connector cable System board 37