HP Spectre 15-ap000 Maintenance and Service Guide - Page 38
Fan, Remove the fan
View all HP Spectre 15-ap000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Fan NOTE: The heat sink spare part kit includes replacement thermal material. Description Fan Spare part number 841263-001 Before removing the fan, follow fan these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 21). 5. Remove the battery (see Battery on page 22). 6. Remove the system board (see System board on page 37). Remove the fan: 1. Disconnect the fan cable from the system board (1). 2. Remove the three Phillips PM2.0×4.5 screws (2) that secure the fan to the computer. 3. Remove the fan (3) from the computer. Reverse this procedure to install the fan. 32 Chapter 5 Removal and replacement procedures