HP Sprocket Studio User Guide - Page 12

Power cord instructions Make sure your power source is adequate for the product voltage rating. The voltage rating is on the product label. The product uses either 100-240 Vac or 200-240 Vac and 50/60 Hz. CAUTION: To prevent damage to the product, use only the power cord that is provided with the product. Environmental Product Stewardship Program For regulatory, environmental, and safety notices, refer to the included sheet in your product packaging and the following statements. This section contains the follow topics: • Power Consumption • Auto-Off • Sleep Mode • HP Planet Partners • Recycling Program • Taiwan ROHS Tables Power consumption HP printing and imaging equipment marked with the ENERGY STAR® logo is certified by the U.S. Environmental Protection Agency. The following mark will appear on ENERGY STAR certified imaging products: Additional ENERGY STAR certified imaging product model information is listed at: http://www.hp.com/go/energystar Auto-Off This feature turns the printer off after 2 hours of inactivity to help reduce energy use, only when connected to the HP Sprocket Studio Power Bank. Auto-Off turns the printer off completely, so you must use the Power button to turn the printer back on. If your printer supports this energy saving feature, Auto-Off is automatically enabled or disabled depending on printer capabilities and connection options. Even when Auto-Off is disabled, the printer enters Sleep mode after 10, 5, or 3 minutes of inactivity to help reduce energy use (set in the sprocket app). By default, Auto-off is disabled when connected to a wall outlet power supply. • Auto-Off is enabled when the printer is turned on and connected to a power bank, if the printer does not have network, fax or Wi-Fi Direct capability, or is not using these capabilities. • Auto-Off is disabled when this product is connected to a wall outlet power supply, to a a printer's wireless or Wi-Fi Direct capability is turned on or when a printer with fax, USB, or Ethernet network capability establishes a fax, USB, or Ethernet network connection. Tip: To conserve power bank power, you can enable Auto-Off, even when the printer is connected or wireless is turned on. 11