HP StorageWorks 2/128 Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 502
traceroute, src_ip, dst_ip, num_requests, service_type, wait_time, max_hops, first_ttl
View all HP StorageWorks 2/128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 502 highlights
2 Note: Enter commands in lowercase only; mixed case is for readability. portCmd 2-468 -s src_ip Specifies the source IP interface that originates the ping request. -d dst_ip Specifies the destination IP address to which to target the ping request. -n num_requests Specifies the number of ping requests. The default is 4. This operand is optional. -q service_type Specifies the type of service in the ping request. The default is 0 and service_type must be an integer from 0 to 255. This operand is optional. -t ttl Specifies the time to live. The default is 100. This operand is optional. -w wait_time Specifies the time to wait for the response of each ping request. The default is 5000 milliseconds and the maximum wait time is 9000. This operand is optional. -z size Specifies the default packet size to a fixed size in bytes. The default is 64 bytes. The total size, including ICMP/IP headers (28 bytes without IP options) cannot be greater than the IP MTU configured on the interface. This operand is optional. --traceroute [slot/]geport -s src_ip -d dst_ip [-h max_hops] [-f first_ttl] [-q type_of_service] [-w timeout] [-z size] Traces the IP router hops used to reach the host dst_ip from one of the source IP interfaces on the GbE port. Valid arguments include: -s src_ip Specifies the local IP address to use for sourcing the probe packets. -d dst_ip Specifies the destination IP address to which to probe the IP router path. -h max_hops Specifies the maximum hop limited used in the outgoing probe packets. The default of probing a maximum of 30 IP router hops. This operand is optional. -f first_ttl Specifies the starting time to live value to first_ttl. The default is 1. -traceroute skips processing for those intermediate gateways that are less than the first_ttl hops. This operand is optional. -q service_type Specifies the type of service in the ping request. The default is 0 and service_type must be an integer from 0 to 255. This operand is optional. -w timeout Sets the time, in seconds, to wait for a response to a probe. The default is 5 seconds. -z size Specifies the size, in bytes, of the trace route packet to use. The default is 64 bytes. The total size, including ICMP/IP headers (28 bytes without IP options) cannot be greater than the IP MTU configured on the Fabric OS Command Reference Manual Publication Number: 53-1000240-01