HP StorageWorks 2/128 Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 666
snmpMibCapShow, Operands, Examples, See Also, agtCfgDefault, configDownload, agtCfgSet, snmpConfig
View all HP StorageWorks 2/128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 666 highlights
2 Note: Enter commands in lowercase only; mixed case is for readability. snmpMibCapShow Note agtCfgDefault also resets the SNMP MIB and trap capability to default along with other SNMP agent configuration. The values can be changed, if user download the configuration data through configDownload command. All the new values successfully configured by snmpMibCapSet command takes effect immediately. If SNMP MIB is disabled, then the corresponding traps are disabled. If any trap group is disabled then the corresponding individual traps also are disabled. The FE and SW MIBs always are accessible. snmpMibCapSet does not prompt the user to turn on or off these MIBs. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples none To display the options for configuring the SNMP MIB capability: switch:admin> snmpmibcapshow FE-MIB: YES SW-MIB: YES FA-MIB: YES FICON-MIB: NO HA-MIB: YES SW-TRAP: YES swFCPortScn: YES swEventTrap: NO swFabricWatchTrap: YES swTrackChangesTrap: YES FA-TRAP: NO SW-EXTTRAP: NO HA-TRAP: YES fruStatusChanged: YES cpStatusChanged: YES fruHistoryTrap: NO See Also agtCfgDefault, agtCfgSet, agtCfgShow, snmpConfig 2-632 Fabric OS Command Reference Manual Publication Number: 53-1000240-01