HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x MIB Reference Guide (AA-RVH - Page 103

fcFxPortPhysModuleIndex, fcFxPortPhysFxPortIndex, fcFxPortPhysAdminStatus, fcFxPortPhysOperStatus,

Page 103 highlights

fcFxPortPhysModuleIndex OID 1.3.6.1.3.42.2.1.2.3.1.1 Description Identifies the module containing the Fx_Port for which this entry contains information. fcFxPortPhysFxPortIndex OID 1.3.6.1.3.42.2.1.2.3.1.2 Description Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is reinitialized. fcFxPortPhysAdminStatus OID 1.3.6.1.3.42.2.1.2.3.1.3 Description The desired state of the Fx_Port: • online (1): Place port online. • offline (2): Take port offline. • testing (3): Initiate test procedures. A management station might place the Fx_Port in a desired state by setting this object accordingly. The testing state (3) indicates that no operational frames can be passed. When an FE initializes, all Fx_Ports start with fcFxPortPhysAdminStatus in the offline state (2). As the result of either explicit management action or per configuration information accessible by the FE, fcFxPortPhysAdminStatus is then changed to either the online (1) or testing (3) state, or remains in the offline state (2). fcFxPortPhysOperStatus OID 1.3.6.1.3.42.2.1.2.3.1.4 Description The current operational status of the Fx_Port: • online (1): Login might proceed. • offline (2): Login cannot proceed. • testing (3): Port is under test. • link-failure (4): Failure after online/testing. The testing state (3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline (2), then fcFxPortPhysOperStatus should be offline (2). If fcFxPortPhysAdminStatus is changed to online (1), then fcFxPortPhysOperStatus should change to 1 (online) if the Fx_Port is ready to accept fabric login request from the attached Nx_Port. It should proceed and remain in the link-failure state (4) if and only if there is a fault that prevents it from going to the online state (1). fcFxPortPhysLastChange OID 1.3.6.1.3.42.2.1.2.3.1.5 Description The value of sysUpTime at the time the Fx_Port entered its current operational status. A value of 0 indicates that the Fx_Port's operational status has not changed since the agent last restarted. Fabric OS 5.x MIB reference guide 103

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278

Fabric OS 5.x MIB reference guide
103
fcFxPortPhysModuleIndex
OID
1.3.6.1.3.42.2.1.2.3.1.1
Description
Identifies the module containing the Fx_Port for which this entry contains information.
fcFxPortPhysFxPortIndex
OID
1.3.6.1.3.42.2.1.2.3.1.2
Description
Identifies the Fx_Port within the module. This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated module. The value remains constant for the
identified Fx_Port until the module is reinitialized.
fcFxPortPhysAdminStatus
OID
1.3.6.1.3.42.2.1.2.3.1.3
Description
The desired state of the Fx_Port:
online (1): Place port online.
offline (2): Take port offline.
testing (3): Initiate test procedures.
A management station might place the Fx_Port in a desired state by setting this object
accordingly. The testing state (3) indicates that no operational frames can be passed.
When an FE initializes, all Fx_Ports start with fcFxPortPhysAdminStatus in the offline state
(2). As the result of either explicit management action or per configuration information
accessible by the FE, fcFxPortPhysAdminStatus is then changed to either the online (1) or
testing (3) state, or remains in the offline state (2).
fcFxPortPhysOperStatus
OID
1.3.6.1.3.42.2.1.2.3.1.4
Description
The current operational status of the Fx_Port:
online (1): Login might proceed.
offline (2): Login cannot proceed.
testing (3): Port is under test.
link-failure (4): Failure after online/testing.
The testing state (3) indicates that no operational frames can be passed. If
fcFxPortPhysAdminStatus is offline (2), then fcFxPortPhysOperStatus should be offline (2). If
fcFxPortPhysAdminStatus is changed to online (1), then fcFxPortPhysOperStatus should
change to 1 (online) if the Fx_Port is ready to accept fabric login request from the attached
Nx_Port. It should proceed and remain in the link-failure state (4) if and only if there is a
fault that prevents it from going to the online state (1).
fcFxPortPhysLastChange
OID
1.3.6.1.3.42.2.1.2.3.1.5
Description
The value of sysUpTime at the time the Fx_Port entered its current operational status. A
value of 0 indicates that the Fx_Port’s operational status has not changed since the agent
last restarted.