HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x MIB Reference Guide (AA-RVH - Page 158

SW agent configuration group swAgtCmtyTable OID 1.3.6.1.4.1.1588.2.1.1.1.4.11 Description A table that contains the access control and parameters of the community, one entry for each community. Note The table displays all of the community strings (read and write) if it is accessed by the write community string. Only read community strings are displayed if it is accessed by the read community string. In Secure Fabric OS, the community strings can be modified only on the primary switch. swAgtCmtyEntry OID Description Index 1.3.6.1.4.1.1588.2.1.1.1.4.11.1 An entry containing the community parameters. swAgtCmtyIdx swAgtCmtyIdx OID Description Note 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.1 The SNMPv1 community entry. The return value for this entry is 1 through 6. swAgtCmtyStr OID Description Note 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.2 This is a community string supported by the agent. If a new value is set successfully, it takes effect immediately. Default values for communities are as follows: • 1 (Secret Code) • 2 (OrigEquipMfr) • 3 (private) • 4 (public) • 5 (common) • 6 (FibreChannel) Community strings 1-3 are read-write and strings 4-6 are read-only. You can change the community setting using the agtCfgSet command. swAgtTrapRcp OID Description Note 158 SW MIB objects 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.3 The trap recipient associated with the community. If a new value is set successfully, it takes effect immediately. If not otherwise set, the default IP address for this trap recipient is 0.0.0.0 and the SNMP trap is not sent for the associated community string. With a setting of non-0.0.0.0 IP address, SNMP traps are sent to the host with the associated community string.