HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x MIB Reference Guide (AA-RVH - Page 241

connUnitLinkUnitTypeY OID 1.3.6.1.3.94.1.12.1.12 Description Type of the FC connectivity unit, as defined in connUnitType. • ISL: Switch device. • End devices: End device types based on an FCP Inquiry (See Table 25). HP does not support Hubs. Table 25 connUnitLinkUnitTypeY end devices Storage system Storage subsystem Direct Access Sequential Access Write-Once CD-ROM Optical Medium Changer Array SES Unknown Unknown Other Anything else (printer device, processor device, scanner, and so forth) connUnitLinkConnIdY OID 1.3.6.1.3.94.1.12.1.13 Description The Fibre Channel ID of this port. If the connectivity unit is a switch, this is expected to be a Big Endian value of 24 bits. If this is loop, then it is the AL_PA that is connected. If this is an E_port, then it contains only the domain ID. If not any of those, unknown or cascaded loop, returns all bits set to 1. Note ISL: Port ID of the remote port. Device: Port ID of the remote port. connUnitLinkCurrIndex Not supported in Fabric OS 2.6.1. OID 1.3.6.1.3.94.1.12.1.14 Description The last-used link index. Statistics group Not supported in Fabric OS 2.6.1. Port types are aggregated into a port type class, such as all the fabric port types. Each individual port has only one statistics table. For all objects in the statistics table, if the object is not supported by the conn unit, then the high order bit is set to 1, with all other bits set to 0 (for example, the last eight bytes of the returned value might be ...:80 00 00 00 00 00 00 00). The high order bit is reserved to indicate whether the object is supported. All objects start at a value of 0 at hardware initialization and continue incrementing until end of 63 bits and then wrap to 0. The case for all Class 1 Frames; HP does not support them. connUnitPortStatTable OID 1.3.6.1.3.94.4.5 Description A list of statistics for the fabric port types. Fabric OS 5.x MIB reference guide 241