HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x MIB Reference Guide (AA-RVH - Page 164

swFCPortLipOuts OID Description 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.32 Counts the number of loop initializations that have been initiated by the port. swFCPortLipLastAlpa OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.33 Description Indicates the arbitrated-loop physical address (AL_PA) of the loop device that initiated the last loop initialization. swFCPortWwn OID Description 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.34 The WWN of the Fibre Channel port. The contents of an instance are in IEEE extended format, as specified in FC-PH. swFCPortSpeed OID Description Note 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.35 The desired baud rate for the port. The baud rate can be 1 Gbit/sec, 2 Gbit/sec, or 4 Gbit/sec. 4 Gbit/sec is applicable only to the SAN Switch 4/32. swFCPortName Supported in Fabric OS 4.1.x and later. OID 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36 Description A string that indicates the name of the addressed port. The names should be persistent across switch reboots. Port names do not have to be unique within a switch or within a fabric. swFCPortSpecifier Syntax Access Status Description Note DisplayString read-only current This string indicates the physical port number of the addressed port. This string can be entered as argument on CLI commands such as portShow or wherever a physical port number is expected. The format of the string is: slot/port, where slot is present only for bladed systems. Example for directors, such as 4/256 SAN Director: swFCPortSpecifier.64 = 4/15 Example for non-bladed systems, such as SAN Switch 4/32: swFCPortSpecifier.31 = 31 164 SW MIB objects