HP StorageWorks 2/64 HP StorageWorks Fabric OS 5.x MIB Reference Guide (AA-RVH - Page 253

trapRegEntry, trapRegIpAddress, trapRegPort, trapRegFilter, trapRegRowState

Page 253 highlights

trapRegEntry OID Description Index 1.3.6.1.3.94.2.3.1 IP/port pair for a specific client. trapRegIpAddress trapRegPort trapRegIpAddress OID Description 1.3.6.1.3.94.2.3.1.1 The IP address of a client registered for traps. trapRegPort OID Description Note 1.3.6.1.3.94.2.3.1.2 The UDP port to send traps to for this host. Normally this would be the standard trap port (162). This object is an index and must be specified to create a row in this table. Set to 162. trapRegFilter OID Description Note 1.3.6.1.3.94.2.3.1.3 This value defines the trap severity filter for this trap host. The connUnit sends traps to this host that have a severity level less than or equal to this value. The default value of this object is Warning. The mapping between errorlog severity level and this variable is: Error log none (0) Critical (1) Error (2) Warning (3) Informational (4) Debug (5) FA-MIB unknown (1) critical (4) error (5) warning (6) info (8) debug (9) This severity applies to all entries. See FcEventSeverity in Table 24 on page 215. The values 1, 3, 7, and 10 are not valid for SET operations. trapRegRowState OID Description 1.3.6.1.3.94.2.3.1.4 Specifies the state of the row. This entry always returns rowActive and allows for read-only. Table 26 provides read/write descriptions. Fabric OS 5.x MIB reference guide 253

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278

Fabric OS 5.x MIB reference guide
253
trapRegEntry
OID
1.3.6.1.3.94.2.3.1
Description
IP/port pair for a specific client.
Index
trapRegIpAddress
trapRegPort
trapRegIpAddress
OID
1.3.6.1.3.94.2.3.1.1
Description
The IP address of a client registered for traps.
trapRegPort
OID
1.3.6.1.3.94.2.3.1.2
Description
The UDP port to send traps to for this host. Normally this would be the standard trap port
(162). This object is an index and must be specified to create a row in this table.
Note
Set to 162.
trapRegFilter
OID
1.3.6.1.3.94.2.3.1.3
Description
This value defines the trap severity filter for this trap host. The connUnit sends traps to this
host that have a severity level less than or equal to this value. The default value of this
object is Warning. The mapping between errorlog severity level and this variable is:
Error log
FA-MIB
none (0)
unknown (1)
Critical (1)
critical (4)
Error (2)
error (5)
Warning (3)
warning (6)
Informational (4)
info (8)
Debug (5)
debug (9)
Note
This severity applies to all entries. See
FcEventSeverity in
Table 24
on page 215.
The values 1, 3, 7, and 10 are not valid for SET operations.
trapRegRowState
OID
1.3.6.1.3.94.2.3.1.4
Description
Specifies the state of the row. This entry always returns rowActive and allows for
read-only.
Table 26
provides read/write descriptions.