HP StorageWorks 4/256 Brocade Fabric OS Command Reference Manual - Supporting - Page 49
N_Port, available N_Port, failover will not occur.
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
ag 2 Displays the F_Ports that are mapped to a given N_Port. Current F_Ports are the F_Ports that are currently routed through the specified N_Port This list may not be the same as configured F_Ports in the case ofN_Port failover. Use the optional N_Port argument to display the F_Ports that are mapped to this specified N_Port only. Note: Failover and failback policies are displayed as enabled (1) or disabled (o). --mapset [ ] Maps list of F_Ports to a specified N_Port forcing all traffic from the F_Ports to be routed through this N_Port to the attached fabric. An F_Port cannot be mapped to more than one N_Port at the same time. F_Ports will be enabled only if the N_Port is online. If any mapping already exists for the N_Port, it will be overwritten with the given F_Port list. Use a blank list ("") to clear the current mappings. --mapadd [ ] Adds specified list of F_Ports to the mapping of an existing N_Port. The traffic for the configured F_Ports will be routed to the fabric throughthe specified N_Port when the F_Ports come online. An F_Port cannot be mapped to more than one N_Port at the same time. --mapdel [ ] Deletes the specified F_Ports from the N_Port mapping. ----failoverenable Enables the failover policy for a given N_Port. When the failover policy isenabled for an N_Port, all currently mapped F_Ports will failover to another N_Port in the event the original N_Port becomes disabled. If there is no other available N_Port, failover will not occur. --failoverdisable Disables the failover policy for a given N_Port. --failovershow If N_Port is specified (optional), the command displays the failover policy for this N_Port. Otherwise, the failover policy for all the N_Ports is displayed. 1=enabled, 0=disabled. --failbackshow [N_Port] If N_Port is specified (optional), the command displays the failback policy for this N_Port. Otherwise, the failover policy for all the N_Ports is displayed. 1=enabled, 0=disabled. --failbackenable Enables the failback policy for a specified N_Port. When failback policy isenabled, all the F_Ports are automatically rerouted back to the N_Ports towhich they were originally mapped as those N_Ports come back online. Only the originally mapped F_Ports fail back. In the case of multiple N_Port failures, only F_Ports that were mapped to the recovered N_Port experience failback. The remaining F_Ports are not redistributed among the online N_Ports during the failback. Fabric OS Command Reference Manual 17 53-1000436-01