HP StorageWorks 4/64 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 462
SEC-1253, SEC-1300, Recommended, Action, supportFtp, supportSave, Severity, Message, Probable Cause
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 462 highlights
66 SEC-1253 Recommended Action Retry the failed security command. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR SEC-1253 Message , [SEC-1253], ,, ERROR, , Bad DCC interface state during , state=. Probable Cause Indicates that an internal error has caused the device connection control (DCC) policy update to fail in the provision, commit, or cancel phases. Recommended Action Retry the failed security command. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR SEC-1300 Message , [SEC-1300], ,, INFO, , This switch is in VcEncode mode. Security is not supported. Probable Cause Indicates that the switch is set up with VC-encoded mode. Recommended Turn off VC-encoded mode before enabling security. Action Severity INFO SEC-1301 Message , [SEC-1301], ,, INFO, , This switch is in interop mode. Security is not supported. Probable Cause Indicates that the switch is interop-mode enabled. Recommended Disable interop-mode using the interopMode command before enabling the Secure Fabric OS Action feature. Severity INFO SEC-1302 Message , [SEC-1302], ,, INFO, , This switch does not have all the required PKI objects correctly installed. 410 Fabric OS Message Reference 53-1000600-02