HP StorageWorks 4/64 Brocade Error Message Reference Guide v6.1.0 (53-1000600- - Page 76
AG-1004, Severity, Message, Probable Cause, Recommended, Action, supportFtp, supportSave, modeshow
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
2 AG-1004 Severity WARNING AG-1004 Message , [AG-1004], ,, ERROR, , Invalid response to fabric login (FLOGI) request from the fabric for N_Port . Probable Cause Indicates that the fabric sent an invalid response to the FLOGI Extended Link Service (ELS) for the specified N_Port. Recommended Action Please check the configuration of the fabric switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AG-1005 Message , [AG-1005], ,, WARNING, , FDISC response was dropped because F_Port is offline. Probable Cause Indicates that the F_Port connected to the host is offline, which caused the FDISC response to drop. Recommended Please check the configuration of the host connected to the specified F_Port. Action Severity WARNING AG-1006 Message , [AG-1006], ,, INFO, , Access Gateway mode has been . Probable Cause Access Gateway mode has been enabled or disabled. Recommended Please run ag --modeshow to verify the current status of the Access Gateway mode. Action Severity INFO AG-1007 Message Probable Cause , [AG-1007], ,, WARNING, , FLOGI response not received for the N_Port connected to the fabric. Indicates that the N_Port connected to the fabric switch is not online. The specified N_Port has been disabled. 24 Fabric OS Message Reference 53-1000600-02