HP StorageWorks 4/64 Brocade Fabric OS Command Reference Manual v6.2.0 (53-100 - Page 116
configDefault, Product ID and Vendor ID
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
2 configDefault configDefault Synopsis Description Notes Resets the non-persistent configuration data to factory defaults. configdefault [-fid FID | -chassis |-all] Use this command to reset the non-persistent configuration settings to their factory defaults. Beginning with Fabric OS v6.2.0, configuration data is grouped into chassis information and switch information. Each configuration type is managed separately. For information on file format and specific parameters contained in each section, refer to the configUpload help page. The behavior of configDefault depends on the environment in which the command is executed. • In a Virtual Fabric environment, when executed without operands, this command resets the switch configuration to defaults on the current logical switch only. An Admin with chassis permissions can use additional parameters to reset configuration data for a specified logical switch (-fid FID), for the chassis (-chassis), or for all logical switches and the chassis (-all). • In a non-Virtual Fabric environment, when executed without operands, this command resets the switch configuration. The -chassis option resets the chassis configuration only. When executed with the -all operand, configDefault resets all of the system's configuration data, including chassis and switch configurations. The -chassis and -fid options are not valid. This command resets non-persistent configuration parameters only. The following parameters are not affected by this command: • Ethernet MAC address, IP address, subnet mask, and boot ROM parameters • IP gateway address • License keys • OEM customization • Product ID and Vendor ID • SNMP configuration • iSCSI configuration • System name • Chassis name • World Wide Name • Zoning configuration (includes aliases, zones, and configurations) • Security parameters and policies • User account passwords (includes all user configuration and all built-in accounts) • Switch PID format • Ethernet Link Mode Refer to the help files for configure and configureChassis help for more information on default values for configuration parameters. This command cannot be executed on an enabled switch. You must first disable the switch using switchDisable or chassisDisable. Some configuration parameters are cached by the system. To avoid unexpected system behavior, reboot the system after executing configDefault. 88 Fabric OS Command Reference 53-1001186-01