HP StorageWorks 4/64 Brocade Fabric OS Command Reference Manual v6.2.0 (53-100 - Page 839
uRouteRemove, Synopsis, Description, Operands, Examples, See Also, configShow, dlsShow, uRouteConfig
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 839 highlights
uRouteRemove 2 uRouteRemove Synopsis Removes a static route. urouteremove in_area domain Description Use this command to remove a previously configured static route. After this command is issued, the route to domain for in_area might change to use a different output port, but only if dynamic load sharing (DLS) is set. If DLS is not set, the route remains as is, with its route attribute changed from static to dynamic. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: in_area Specify the input port of the static route to remove. in_area can be either an F_Port or an E_Port. domain Specify the destination domain of the static route to remove. Examples To remove a static route for all traffic coming in from port 1 and addressed to domain 2: switch:admin> urouteremove 1 2 done. See Also configShow, dlsShow, uRouteConfig, uRouteShow Fabric OS Command Reference 811 53-1001186-01