HP StorageWorks 4/64 Brocade Fabric OS Command Reference Manual v6.2.0 (53-100 - Page 216
errFilterSet, Synopsis, Description, Operands, console, Examples, See Also, errDump, errShow
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
2 errFilterSet errFilterSet Synopsis Sets a filter for an error log destination. errfilterset [-d "destination"][-v severity] Description Use this command to set a filter for an error log destination. A filter is set based on the severity level of the messages. If no parameters are specified, this command displays the filters that are currently in use. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: -d destination Specifies the destination for the filter. The string console is the only valid value at this time. -v severity Specifies the minimum severity level of the message to pass through the filter. Valid values are INFO, WARNING, ERROR, or CRITICAL. Input values are not case sensitive. Examples To display the current filter settings: switch:admin> errfilterset console: filter severity = WARNING See Also To set the filter severity level for the console: switch:admin> errfilterset -d console -v warning errDump, errShow 188 Fabric OS Command Reference 53-1001186-01