HP StorageWorks 4/64 Brocade Fabric OS Command Reference Manual v6.2.0 (53-100 - Page 675
To display Byte Streaming parameters, from this display for the next command
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 675 highlights
portShow 2 To display Byte Streaming parameters: switch:admin> portshow fciptunnel ge1 0 -bstr Port: ge1 Tunnel ID 0 Remote IP Addr 192.168.32.2 Local IP Addr 192.168.32.1 Remote WWN Not Configured Local WWN 10:00:00:05:1e:41:2f:2e Compression off Fastwrite on Tape Pipelining off Committed Rate 400000 Kbps (0.400000 Gbps) SACK on Min Retransmit Time 100 Keepalive Timeout 10 Max Retransmissions 8 VC QoS Mapping off DSCP Marking (Control): 0, DSCP Marking (Data): 0 VLAN Tagging Not Configured TCP Byte Streaming on Status : Active Connected Count: 9 Uptime 23 hours, 19 minutes, 45 seconds Streaming TCP vars: head index = 24 tail index = 24 Current Count = 0 Pending Frames High = 16 Segment Count High = 3 Data Mover Restarts = 0 Data Mover Desc Full = 0 Frame Too Large Count = 0 Max Reference Count = 15 Max Frame Size = 2116 Max Segments Pulled = 0 Reached Max Pending Frames = 0 FCIP Smoothed RTT = 202 ms FCIP RTT Variance = 1 ms FC control traffic TCP connection: Local 192.168.32.1:4129, Remote 192.168.32.2:3225 Data transfer TCP connection: Local 192.168.32.1:4130, Remote 192.168.32.2:3226 To display FICON EPCB for a GbE port 0 tunnel ID 1 with post display clearing of relevant statistics: switch:admin> portshow ficon ge0 1 -epcb -clear To display a list of discovered devices and selected path and status information on each. Get the adrs from this display for the next command: switch:admin> portshow ficon ge0 all -fdcb To display details on the FDCB specified in the adrs argument which was derived from the previous example: switch:admin> portshow ficon ge0 all -fdcb 10008000 Fabric OS Command Reference 647 53-1001186-01