HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch event message - Page 31
In User Service RADIUS, A Remote Authentication Dial
![]() |
View all HP StorageWorks 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Table 4 Alarm events and recommended action (Continued) Icon Event ID and message Description Action (A1007.001D) (Ignoring RADIUS Server Radius_Server, invalid IP address configured) A Remote Authentication Dial In User Service (RADIUS) server could not be found at the configured IP address. Check the RADIUS server, or change the configuration to use an IP address for a valid RADIUS server. (A1007.001F) (Access reject from RADIUS server IP_address:port for device on this port) (A1007.0020) (MAX Retry count reached on CHAP Authentication Protocol Reset, failing Authentication) (A1007.0021) (No response to RADIUS access request for device on port port) Security authentication has reached the maximum retry count. The port will now isolate. A Remote Authentication Dial In User Service (RADIUS) server has rejected a RADIUS authentication request. A configured Remote Authentication Dial In User Service (RADIUS) server did not respond to an authentication request within the timeout period. Check the security configuration. Check the configuration on both the switch and on the RADIUS server for incompatibilities. Check RADIUS server configuration and the RADIUS server. (A1007.0022) (Invalid response authenticator from RADIUS server IP_address:port, check shared secret) (A1007.0023) (Invalid response authenticator from RADIUS server IP_address:port, check shared secret There is a Remote Authentication Dial In User Service (RADIUS) server configuration issue. There is a Remote Authentication Dial In User Service (RADIUS) configuration problem. Verify that the shared secret is configured on both the RADIUS server and the switch. Confirm that the shared secret configured on the switch is identical to the shared secret configured on the RADIUS server. (A1007.0024) (Invalid access accept from RADIUS server IP_address:port, bad or missing Service-Type) A service-type Remote Authentication Dial In User Service (RADIUS) attribute was not found in a RADIUS packet. This is a RADIUS server configuration issue. Consult your RADIUS server documentation. (A1007.0025) (Security feature not supported.) The switch is coming out of Non-Disruptive Code Load and Activation (NDCLA) and had an active security prior to the NDCLA, but the security feature is no longer supported. A license key may be required for the security feature. (A1007.0026) (Unable to validate Chap Response from device_WWN, possible Chap secret misconfiguration or security breach attempt.) A Challenge Handshake Authentication Protocol (CHAP) authentication attempt failed due to failure while comparing secrets. Check security configuration. 8/20q Fibre Channel Switch event messages reference guide 31
![](/manual_guide/products/hewlettpackard-ak241a-hp-storageworks-820q-fibre-channel-switch-event-messages-reference-guide-56977200-2008-e16a048/31.png)